The Nios® II Processor: Booting (Legacy Course) - 20 Minutes This course will teach you about the different booting sequences and methods for the Nios II processor. You will learn about booting from serial and parallel flash, using a boot copier, or executing in place (XIP). Using the Altera® Quartus® Prime programmer command line tool to program flash will be explained. Booting and executing from the User Flash Memory (UFM) in an Altera® Max® 10 device will also be discussed. Course Objectives At course completion, you will be able to: Describe the different Boot sequences for the Nios II processor use the quartus_pgm command line tool to program flash for the Nios II processor Explain the functions of a Boot copier and Start-up code and Know where to Start to modify it Skills Required Basic knowledge of C programming If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com . Reference Course Code: FPGA_ONIIBOOTING. FPGA_ONIIBOOTING. <p>The Nios II Processor: Booting</p>