Why does the TSE signal rx_recovclkout or Native PHY signal rx_pma_clkout not toggle in Cyclone® V - Why does the TSE signal rx_recovclkout or Native PHY signal rx_pma_clkout not toggle in Cyclone® V Description Due to an issue with Quartus® II software v13.1 and later, when using Cyclone® V devices with A9, C9, or D9 Member Codes, the Native PHY signal rx_pma_clkout or TSE signal rx_recvlkout may not toggle in some transceiver locations. Resolution A patch is provided below for Intel® Quartus® II software v14.0 and v14.0.2. Download the version 14.0 patch 0.32 for Windows (.exe) Download the version 14.0 patch 0.32 for Linux (.run) Download the Readme for the Quartus II software version 14.0 patch 0.32 (.txt) Download the version 14.0.2 patch 2.12 for Windows (.exe) Download the version 14.0.2 patch 2.12 for Linux (.run) Download the Readme for the Quartus II software version 14.0.2 patch 2.12 (.txt) You'll need to recompile your project after installing this patch. This issue will be resolved in a future release of the Intel® Quartus® II software. Note: fixed in 14.1.1 Custom Fields values: ['novalue'] Troubleshooting 1506789368 False ['novalue'] ['FPGA Dev Tools Quartus II Software'] 14.1.1 13.1 ['Cyclone® V GX FPGA'] ['novalue'] ['novalue'] ['novalue']