scanin-scanout support in Intel Agilex - scanin-scanout support in Intel Agilex Do we have scanin-scanout support for FP16 mode in the DSP slice in Intel Agilex FPGAs? I don't see it in the user guide. In fact, I see scanin-scanout support only for 18 bit and 27 bit fixed point modes. I don't see it for any other modes. Any reason why this is the case? Or is this a documentation issue? Replies: Re: scanin-scanout support in Intel Agilex Hi SengKok, I don't have any follow-up questions. Please feel free to transition this thread to community support. Appreciate your help. Thanks, Aman Replies: Re: scanin-scanout support in Intel Agilex If further support is needed in this thread, please post a response within 15 days. After 15 days, this thread will be transitioned to community support. The community users will be able to help you with your follow-up questions. Replies: Re: scanin-scanout support in Intel Agilex Yes. You are right. Thanks. Replies: Re: scanin-scanout support in Intel Agilex Thanks, SengKok. I was wondering if this is a documentation issue. Looks like it's not. Just to confirm... I don't see it shown to be supported in the new fixed point 9-bit mode as well. So, only the older 18 and 27 bit fixed-point modes have it. Right? Replies: Re: scanin-scanout support in Intel Agilex Hi, Yes there is no scanin-scanout in the Floating-point Arithmetic mode. You may refer to figure 5 in the following document for more detail. https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/agilex/ug-ag-dsp.pdf