Why am I seeing an error “read Ethernet ANLT channel 0 register anlt_ltstat_csr6” or link training failure during hardware testing when using F-tile Dynamic Reconfiguration Suite IP with Auto-negotiation and Link Training (AN/LT) enabled? - Why am I seeing an error “read Ethernet ANLT channel 0 register anlt_ltstat_csr6” or link training failure during hardware testing when using F-tile Dynamic Reconfiguration Suite IP with Auto-negotiation and Link Training (AN/LT) enabled? Description Due to a problem in the Quartus® Prime Pro Edition Software version 24.3, you may see an error during hardware testing when using the F-Tile Dynamic Reconfiguration Suite IP with Auto-negotiation and Link Training (AN/LT) enabled, and if user logic is enabled. The error may look like below: Resolution For a workaround, follow the steps below: ) Navigate to “../[example design]/hardware_test_design/hwtest/tests/ftile_eth_dr_test.tcl” ) Search for “ Setting sequencer reset ” code a) For FGT designs, comment line #386 as shown below: b) For FHT designs, modify line #386 as shown below: This problem is fixed beginning with the Quartus® Prime Pro Edition software version 24.3.1. Custom Fields values: ['novalue'] Troubleshooting 14023417934 False ['F-Tile Dynamic Reconfiguration Suite IP'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 24.3.1 24.3 ['Agilex™ 5 FPGAs and SoCs', 'Agilex™ 7 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']