Overclocking not supported. Cannot set MPU frequency to 1000 MHz. It exceeds the maximum operating speed of 800 MHz supported by this part - Overclocking not supported. Cannot set MPU frequency to 1000 MHz. It exceeds the maximum operating speed of 800 MHz supported by this part Description Due to a problem in the Quartus® Prime Standard and Pro software version 16.0 and earlier, you may see the error on Arria® 10 Hard Processor System in Qsys when a selected device and VCCL_HPS are -3 grade and 0.95V, respectively. Resolution This problem is fixed beginning with the Quartus Prime Standard and Pro software version 16.1. Custom Fields values: ['novalue'] Troubleshooting FB: 379148; False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 16.1 16.0 ['Arria® 10 SX FPGA'] ['novalue'] ['novalue'] ['novalue']