Why does niosv-stack-report return error during Nios® V build flow in RiscFree* IDE for Intel® FPGAs? - Why does niosv-stack-report return error during Nios® V build flow in RiscFree* IDE for Intel® FPGAs? Description Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 22.2, this problem may be seen in RiscFree* IDE for Intel® FPGAs when building the Nios® V processor software. The error descriptions are shown as followed make: *** [Makefile:91: all] Error 2 make[1]: *** [CMakeFiles/Makefile2:156: CMakeFiles/niosv-stack-report.dir/all] Error 2 make[1]: *** Waiting for unfinished jobs.... make[2]: *** [CMakeFiles/niosv-stack-report.dir/build.make:73: app.elf.stack_report] Error 127 The niosv-stack-report utility is only present in Intel® Quartus® Prime Pro Edition Software. The error message above would occur when building the application if, RiscFree* IDE for Intel® FPGAs is installed as a standalone development tool with the Intel® Quartus® Prime Programmer RiscFree* IDE for Intel® FPGAs is not launched from the Nios® V Command Shell Resolution To work around this problem in the Intel® Quartus® Prime Pro Edition Software version 22.2, do these in any order: You may ignore this error and proceed as usual. The necessary software build files (such as .elf file and .objcopy file) will be created and are not affected by this error Launch the RiscFree* IDE for Intel® FPGAs from the Nios® V Command Shell This problem is fixed starting with the Intel® Quartus® Prime Pro Edition Software version 22.3. Custom Fields values: ['novalue'] Troubleshooting 16016317178, 15011285732, 22015417524 False ['Nios® V/m Processor'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 22.3 22.2 ['Agilex™ 7 FPGAs and SoCs', 'Arria® 10 FPGAs and SoCs', 'Cyclone® 10 GX FPGA', 'Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']