Error : The specified location does not contain information about your hardware - Error : The specified location does not contain information about your hardware Description You may receive this error message when you install the USB-Blaster™ programming cable driver in Windows XP or Windows 2000. To correctly install the driver, use the Found New Hardware wizard that starts the first time you plug the USB-Blaster cable into the PC. Do not use the Add Hardware wizard from the Control Panel . If you get this error, uninstall the USB-Blaster driver then reinstall it, using the following procedures. Driver Uninstallation Instructions for Windows XP and 2000 Plug the USB-Blaster cable into the PC. On the taskbar, click Start then click Settings and then click Control Panel . Double-click System . On the Hardware tab, click Device Manager Under Universal Serial Bus controllers , right-click the Altera USB-Blaster device, and click Uninstall on the pop-up menu Unplug the USB-Blaster. Restart Windows. Driver Reinstallation Instructions For Windows XP, follow the USB-Blaster Driver for Windows XP Installation Instructions. For Windows 2000, follow the USB-Blaster Driver for Windows 2000 Installation Instructions. Complete the reinstallation by Setting Up Programming Hardware in Quartus II Software . Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['novalue'] novalue novalue ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']