Does the Agilex® 7 FPGA F-Series (2 × F-Tiles) Development Kit support CvP over the PCIe* 4.0x16 Gold Fingers? - Does the Agilex® 7 FPGA F-Series (2 × F-Tiles) Development Kit support CvP over the PCIe* 4.0x16 Gold Fingers? Description The Agilex ® 7 FPGA F-Series Development Kit (2x F-Tile) (AGF023) do not support CvP over the PCIe* 4.0x16 Gold Finger Card Edge connector. CvP is supported over the MCIO x4 interface. Resolution CvP is not supported over the PCIe* 4.0x16 Gold Finer Card Edge Connector on the Agilex ® 7 FPGA F-Series Development Kit (2x F-Tile) (AGF023). This problem will not be fixed in a future release as the problem is due to the physical location of the PCIe* 4.0x16 F-Tile being located on the Right Hand Side of the device. CvP is only supported on the Left Had Side Tile of this device. Custom Fields values: ['novalue'] Troubleshooting CEG-38609 No ['Interfaces PCIe'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 26.1 ['Agilex™ 7 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']