Why is the CONF_DONE low after configuring using the CVP periphery image in Agilex™ 5 devices with OPN A5E 008 and A5E 013? - Why is the CONF_DONE low after configuring using the CVP periphery image in Agilex™ 5 devices with OPN A5E 008 and A5E 013? Description Due to a problem in Quartus® Prime Pro Edition Software version 24.3, you may observe that the CONF_DONE signal is low after configuring Agilex™ 5 devices with OPN A5E 008 and A5E 013 using the CVP periphery image. Consequently, the PCIe link is not up, and the device does not transition into user mode. Resolution To work around this problem, you can configure the Agilex™ 5 devices with CVP full image. This is schedule to be fixed in a future release of Quartus® Prime Pro Edition Software. Custom Fields values: ['novalue'] Troubleshooting 15016726091 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 24.3 ['Agilex™ 5 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']