Why does the F-Tile Ethernet FPGA Hard IP fail to simulate when configured for MII PCS only, PCS66 OTN, and PCS66 Flex using the Quartus® Prime Pro Edition Software version 22.4 and 23.1 on the Agilex™ 7 devices? - Why does the F-Tile Ethernet FPGA Hard IP fail to simulate when configured for MII PCS only, PCS66 OTN, and PCS66 Flex using the Quartus® Prime Pro Edition Software version 22.4 and 23.1 on the Agilex™ 7 devices? Description Due to a problem in the Quartus® Prime Pro Edition Software version 22.4 and 23.1, the F-Tile Ethernet Hard IP and F-tile Auto-Negotiation and Link Training for Ethernet IP will fail to simulate when the client interface is set as MII PCS only , PCS66 OTN and PCS66 FlexE when using on Agilex™ 7 devices with the following OPNs: AGMA032R31Bxxxx AGMA039R31Bxxxx AGMB032R31Bxxxx AGMB039R31Bxxxx AGME032R47Axxxx AGME039R47Axxxx AGMF032R47Axxxx AGMF039R47Axxxx AGMG032R47Axxxx AGMG039R47Axxxx AGMH032R47Axxxx AGMH039R47Axxxx Resolution To avoid this simulation failure, you can adopt the following two workarounds: Change the device OPN. The simulation will pass if the OPN is not in the above description list. Change the client interface. The simulation will pass if the client interface is set as MAC segmented or MAC Avalon ST . This problem will be fixed in a future release of the Quartus® Prime Pro Edition Software. Custom Fields values: ['novalue'] Errata 16018921755 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 23.4 22.4 ['Agilex™ 7 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']