How to Begin a Simple FPGA Design - Same Course in Japanese: はじめての FPGA 設計 Same Course in Simplified Chinese: 如何开始一个简单的FPGA设计 19 Minutes This training is for engineers who have never designed an FPGA before. You will learn about the basic benefits of designing with FPGAs and how to create a simple FPGA design using the Altera® Quartus® Prime software. A software demonstration walks you through the entire process. If you’ve purchased a Cyclone® V GX FPGA Starter Kit from Terasic (http://www.terasic.com.tw/cgi-bin/page/archive.pl?LanguageEnglish&No830), you can transfer the programming file created during the tutorial to the development board. Course Objectives At course completion, you will be able to: Understand the benefits and advantages to including FPGAs in your system designs Start a new FPGA design in the Altera® Quartus Prime software Create a schematic using the schematic Editor Convert HDL files into schematic symbols Create Basic pin and timing constraints compile a design and program an FPGA Skills Required Background in digital logic design If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com . Reference Course Code: FPGA_ODSW1010. FPGA_ODSW1010. <p>How to Begin a Simple FPGA Design</p>