Power and Thermal Analyzer (PTA) for Altera® FPGAs - 83 Minutes (This training is for the tool found in version 25.3 or later of the Altera Quartus Prime Software. If you are using an earlier version, enroll in the Power and Thermal Calculator (PTC) eLearning .) Designing for low-power in today’s high-speed Altera® FPGA designs is more important than ever. Knowing the final design’s power usage early in the design process is necessary for making power supply and device cooling decisions. This training will give you the knowledge you need to perform an early power estimate for Agilex™ and Stratix® 10 device designs using the Altera® Power and Thermal Analyzer. You'll learn how this powerful tool can be used at any stage of the FPGA design process to quickly and easily estimate both static and dynamic power used by your design. You'll also learn how to perform a thermal analysis that will assist in the design of a cooling solution for these multi-die devices. Course Objectives At course completion, you will be able to: Use the Altera® Power and Thermal Analyzer (PTA) for quick, what-if power analysis at any stage of development Understand the differences between static and dynamic power and how they are analyzed by the tool Perform a thermal analysis at any stage of the FPGA design process for implementing a successful cooling solution Skills Required Basic understanding of the FPGA design flow and the Quartus® Prime software Basic understanding of power measurement and power supply design If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the notes section of the player. If you need assistance with this course, please email fpgatraining@altera.com . Reference Course Code: FPGA_OPWRPTA. FPGA_OPWRPTA.