hotrst_exit Signal Inactive in Soft Reset Controller for Arria V Hard IP for PCI Express IP Core - hotrst_exit Signal Inactive in Soft Reset Controller for Arria V Hard IP for PCI Express IP Core Description The hotrst_exit signal is not asserted when the LTSSM exits the hot reset state. This error occurs when you use the soft reset controller to reset the Arria V Hard IP for PCI Express IP Core. Resolution No workaround is required. The timing shown in the figure, Hard IP for PCI Express and Application Logic Reset Sequence , is still correct. Custom Fields values: ['novalue'] Troubleshooting novalue True ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 11.1 ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']