What voltage should be connected to VCCH_SDM when using an Intel Agilex® 7 device with both R-tile and F-tile? - What voltage should be connected to VCCH_SDM when using an Intel Agilex® 7 device with both R-tile and F-tile? Description Connect 0.9V to VCCH_SDM when using an Intel Agilex® device with both R-tile and F-tile. In Table 7 of the Intel Agilex® Device Data Sheet, the typical voltage of VCCH_SDM for E-tile, P-tile, and R-tile devices is 0.9V, and the typical voltage of VCCH_SDM for F-tile devices is 0.8V. However, it doesn't mention Intel Agilex® 7 devices with both R-tile and F-tile. Resolution Connect the correct voltage to VCCH_SDM depending on the configuration of transceiver tiles in the Intel Agilex® device. The above information will be added in a future release of the Intel Agilex® 7 Device Data Sheet. Custom Fields values: ['novalue'] Troubleshooting 14017863269 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 23.2 22.2 ['Agilex™ 7 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']