Error : Device has stopped receiving configuration data - Error : Device has stopped receiving configuration data Description You may see this error message in the Intel® Quartus® Prime Pro Programmer versions 18.1 or later when configuring Intel Stratix® 10 FPGAs with a design where 3V IO is used, but the respective transceiver tile is not powered up. The full error message is : Error: Device has stopped receiving configuration data Error message received from device : Device is in configuration state Operation failed Resolution To avoid this error and to enable 3V IOs in a design targeting any variant of Intel Stratix® 10 FPGAs, power up the VCCR_GXB and VCCH_GXB rails of the respective transceiver tile as per the Intel Stratix 10 Device Family Pin Connection Guidelines . Custom Fields values: ['novalue'] Troubleshooting 1807084343 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] No plan to fix 17.1 ['Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']