How to add IP_RECONFIG_ID assignment on when using the F-Tile PMA/FEC Direct PHY Multirate Intel® FPGA IP - How to add IP_RECONFIG_ID assignment on when using the F-Tile PMA/FEC Direct PHY Multirate Intel® FPGA IP Description As noted in the F-Tile Dynamic Reconfiguration Suite Intel® FPGA IP User Guide, we recommend allowing the Intel® Quartus® Prime Software to choose reconfiguration profile IDs automatically. If the reconfiguration profile ID manual setting is still needed, add the assignment on a "per-IP" basis. Resolution The assignment is on a “per IP” basis and not on a per-profile basis. An example of the assignment is shown below for an Ethernet MRIP instance: s et_instance_assignment -name IP_RECONFIG_ID 1 -to my_e25g_1_inst_1|eth_f_0 Assuming the design had (2) secondary profiles, then the Profile IDs would then be assigned as follows: Base Profile ID = 1 Secondary Profile 1 ID = 2 Secondary Profile 2 ID = 3 Custom Fields values: ['novalue'] Troubleshooting 15012747772 False ['L-Tile H-Tile Transceiver Native PHY Stratix® 10 FPGA IP'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue No plan to fix ['Agilex™ 7 FPGAs and SoCs', 'Agilex™ 9 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']