Lattice to Agilex™ 3 Migration - 35 Minutes This training is intended for Lattice FPGA designers who are familiar with the Lattice software and want to convert existing designs to the Quartus® Prime Pro Edition software environment. It describes the Altera® FPGA technologies and then compares devices available for the different process technologies. The unique features of the Agilex™ 3 device are also highlighted. This training parallels the design flows in the Quartus® Prime Pro Edition software and the Lattice software, comparing features wherever possible. It provides guidelines for converting Lattice designs, including IP Catalog modules and instantiated primitives, to the Quartus® Prime Pro Edition Software. Course Objectives At course completion, you will be able to: Describe the current Altera® Agilex™ 3 FPGA Family and Architectures, and compare their device features with Lattice* FPGAs Highlight the unique features of the Altera® Quartus® Prime Pro Design Software Explore the differences in the design flow between Altera® Quartus® Prime Pro Software and Lattice Radiant Software Understand the design migration procedure of converting an existing Lattice Project to Altera® Quartus® FPGA Design Flow targeting Agilex™ 3 devices Skills Required Basic Knowledge of FPGA Design Flow and Lattice software If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com. Reference Course Code: FPGA_OLATAG3M. FPGA_OLATAG3M. <p>Lattice to Agilex 3 Migration</p>