Can I program only the UFM and retain the contents of the CFM in an Intel® MAX® 10 device? - Can I program only the UFM and retain the contents of the CFM in an Intel® MAX® 10 device? Description Yes, It is possible to program only the User Flash Memory (UFM) and retain the Configuration Flash memory (CFM) content in Intel® MAX® 10 FPGAs. However, there are some cases where the Intel® Quartus® Prime Programmer will issue a full chip erase. In such a case, the Intel® Quartus® Prime Programmer will raise the warning message below while programming: Warning (16139): Perform full chip erase and program at device index 1 Resolution To avoid Intel® Quartus® Prime Programmer performing a full chip erase of the Intel® MAX® 10 device, ensure: The ICB settings of the new POF file match the ICB settings of the previously programmed POF file. Verify Protect feature is disabled Related Articles https://www.intel.com/content/www/us/en/support/programmable/articles/000076381.html Custom Fields values: ['novalue'] Troubleshooting 18035803483 False ['novalue'] ['novalue'] novalue novalue ['MAX® 10 10 FPGAs'] ['novalue'] ['novalue'] ['novalue']