Can I drive signals into the DATA [1..4] pins after configuration in Altera devices where the DATA [1..4] pins are dedicated configuration pins? - Can I drive signals into the DATA [1..4] pins after configuration in Altera devices where the DATA [1..4] pins are dedicated configuration pins? Description Yes, you can drive signals into the DATA [1..4] pins after configuration in Altera® devices where the DATA[1..4] pins are dedicated configuration pins. These pins will be tri-stated after configuration is complete and the FPGA will ignore any signals that is being driven on them. Refer to the respective device Pin Connection Guidelines to determine if DATA[1..4] pins are dedicated configuration or dual purpose I/O pins. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['novalue'] novalue novalue ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']