Intel® Simics® Simulator for Altera® FPGAs Command Line Interface - 18 Minutes This eLearning on Altera® Simics® Simulator for Altera® FPGAs covers the command line interface use of the simulator and an overview of the setup for simulation. The Intel® Simics Simulator is used to test software early on in the development process. Intel® Simics uses a virtual platform for Altera® Agilex™ 5 SoC FPGA, to simulate the corresponding hardware. The model and virtual platform provide you with capabilities to test your software in early stages of the development process, but you can also use simulation as part of the continuous integration process. Course Objectives At course completion, you will be able to: Deploy the virtual platform for Altera® Agilex™ 5 SoC FPGA to use Intel® Simics Simulator command line interface. Perform hardware inspection and interact with the embedded OS prompt in the virtual platform for Altera® Agilex™ 5 SoC FPGA. Skills Required Previous knowledge on SoC FPGAs Basic Embedded OS knowledge to interact with serial console and terminal. Understanding of the Booting flow for SoC FPGAs. Recommended: Previous Using Altera® Agilex™ 7 SoC learning plan. If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com Reference Course Code: FPGA_OSIMCLI. FPGA_OSIMCLI. <p>Intel Simics Simulator for Altera FPGAs Command Line Interface</p>