For which timing corners does the Fitter optimize designs when the 'Optimize multi-corner timing' option is enabled? - For which timing corners does the Fitter optimize designs when the 'Optimize multi-corner timing' option is enabled? Description In the Quartus® II software, when the 'Optimize multi-corner timing' option is enabled on the Fitter Settings page, the Fitter will optimize designs for both the slow-process, high-temperature timing corner and the fast-process, low-temperature timing corner. In 65-nm and newer technologies, there is also a slow-process, low-temperature timing corner available for analysis with the TimeQuest Timing Analyzer. However, the Fitter does not optimize designs based on this timing corner. This problem may be fixed in a future version of the Quartus II software. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['novalue'] novalue novalue ['Arria® II GX FPGA', 'Cyclone® III FPGAs', 'Cyclone® III LS FPGA', 'HardCopy™ III ASIC Devices', 'HardCopy™ IV E ASIC Devices', 'HardCopy™ IV GX ASIC Devices', 'Stratix® III FPGAs', 'Stratix® IV E FPGA', 'Stratix® IV GT FPGA', 'Stratix® IV GX FPGA'] ['novalue'] ['novalue'] ['novalue']