Questa Simulator not launching in Linux - Questa Simulator not launching in Linux I have recently installed Quartus Prime Lite Edition 22.1std.2 Build 922 in my Linux Mint 21.1 desktop. I'm currently working on a project and I've been meaning to simulate a Verilog module through a testbench. My design compiles fine. I have done all the setup steps required to achieve this, and I'm executing Tools > Run Simulation Tool > RTL Simulation. The messages I'm getting don't show any error: Info (22036): Successfully launched NativeLink simulation (quartus_sh -t "/home/jorge/Aplicaciones/Quartus/quartus/common/tcl/internal/nativelink/qnativesim.tcl" --rtl_sim "Pulse_Detector" "Pulse_Detector") Info (22036): For messages from NativeLink execution see the NativeLink log file /path/to/project/Pulse_Detector/Pulse_Detector_nativelink_simulation.rpt And the log file refered above doesn't show anything either: Info: Start Nativelink Simulation process Info: NativeLink has detected Verilog design -- Verilog simulation models will be used ========= EDA Simulation Settings ===================== Sim Mode : RTL Family : cyclonev Quartus root : /home/jorge/Aplicaciones/Quartus/quartus/linux64/ Quartus sim root : /home/jorge/Aplicaciones/Quartus/quartus/eda/sim_lib Simulation Tool : questa intel fpga Simulation Language : verilog Simulation Mode : GUI Sim Output File : Sim SDF file : Sim dir : simulation/questa ======================================================= Info: Starting NativeLink simulation with Questa Intel FPGA software Sourced NativeLink script /home/jorge/Aplicaciones/Quartus/quartus/common/tcl/internal/nativelink/modelsim.tcl Warning: File Pulse_Detector_run_msim_rtl_verilog.do already exists - backing up current file as Pulse_Detector_run_msim_rtl_verilog.do.bak9 Info: Spawning Questa Intel FPGA Simulation software Info: NativeLink simulation flow was successful However the simulation software does not launch at all. I tried to open it by clicking the vsim executable in 'QuartusPath/questa_fse/linux_x86_64' and it doesn't work either. I also did the solution in the following link, and it didn't help: https://community.intel.com/t5/Intel-Quartus-Prime-Software/Can-t-launch-Questa-from-Quartus/m-p/1466860#M77661 I would appreciate some help. Replies: Re: Questa Simulator not launching in Linux Hello, Unfortunately I wasn't able to get the software running on Linux Mint. I ended up using another machine with Windows 11. I don't know if there's a solution for this though. Replies: Re: Questa Simulator not launching in Linux Hello, I'm running into the very same issue. What did you do following this post and answer? It's weird that according to the table in the link, Ubuntu is supported but Mint isn't. Replies: Re: Questa Simulator not launching in Linux Hi, Check this previous post link https://community.intel.com/t5/Intel-FPGA-Software-Installation/Questa-Intel-FPGA-Starter-Edition-does-not-recognise-license/m-p/1395125 Linux Mint is not an officially supported OS for Questa. Please use the supported OS stated in this link https://www.intel.com/content/www/us/en/support/programmable/support-resources/design-software/os-support.html Thanks, Best Regards, Sheng