Is the QSPI_READ_SHA command supported by Intel® Stratix® 10 devices? - Is the QSPI_READ_SHA command supported by Intel® Stratix® 10 devices? Description The Mailbox Client Intel® FPGA IP User Guide states that the QSPI_READ_SHA command is only supported by Intel Agilex® 7 devices. Starting in Intel® Quartus® Prime Pro Edition Software version 22.4, Intel® Stratix® devices support the QSPI_READ_SHA512 command, which only supports SHA512 mode. Details of this command are below: Command Code (Hex) Command Length Response Length Description QSPI_READ_SHA512 6E 2 16 This command takes two 32-bit words as arguments. Word 0: Bits [1:0]: SHA Variant. Enters 00 for the SHA512 algorithm Bits[31:2]: Start Address. This is the address in Flash to start verifying from. The address must be 4 bytes aligned. Word 1: Bits [31:0]: NumBytes. This represents the number of bytes to be used in the SHA read. It must be a multiple of 64. The response length returns 16 words. Note: This command is only supported on Intel Stratix 10 devices. Resolution The Mailbox Client Intel® FPGA IP User Guide will be updated in a future revision to include the information above. Custom Fields values: ['novalue'] Troubleshooting 15013265776 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 22.4 ['Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']