Makefile issue while creating prelaoder for DE1-SoC - Makefile issue while creating prelaoder for DE1-SoC Hi all, I am stuck generating the preloader for DE1-SoC using SoC EDS. I've successfully generated the hardware design without any errors. And then, created a HPS-BSP using the bsp-editor by following the BSP settings provided in https://sudonull.com/post/69657-Launching-Bare-metal-applications-on-Cyclone-V-SoC (my whole design is based on this post) but, the generated makefile only contains the following snippet of code. .PHONY: all all: @echo "Please visit https://rocketboards.org/foswiki/Documentation/BuildingBootloader for instructions on how to build the bootloader." Is this because some issue in the design or due to some tool/version issue? Replies: Re: Makefile issue while creating prelaoder for DE1-SoC Hi anrfpga, I am closing this thread for now. Thanks. Regards, Aik Eu Replies: Re: Makefile issue while creating prelaoder for DE1-SoC Hi anrfpga, I will close this thread if no further question. Thanks. Regards, Aik Eu Replies: Re: Makefile issue while creating prelaoder for DE1-SoC Hi anrfpga, I think is recommended to use the link below to build your project https://rocketboards.org/foswiki/Documentation/BuildingBootloaderCycloneVAndArria10 The U-boot version in the previous build flow can be too old, there might be some incompatible issue with newer hardware components. Now you can git clone the u-boot following the latest build flow. Thanks. Regards Aik Eu