Why does Quartus® Prime Standard Edition Software v24.1 hang and fail to close after using the Programmer? - Why does Quartus® Prime Standard Edition Software v24.1 hang and fail to close after using the Programmer? Description Due to a problem in the Quartus® Prime Standard Edition Software version 24.1 and later, the Quartus® Prime Standard Edition Software might become unresponsive and fail to close after running the Quartus® Prime Programmer on Windows* 10 environments. The typical sequence that triggers the hang is: Launch the Quartus® Prime Standard Edition Software. Launch the Quartus® Prime Programmer from within the Quartus® Prime Standard Edition Software and complete programming. Close the Quartus® Prime Programmer. Attempt to close the Quartus® Prime Standard Edition Software. Result: Windows shows “Not Responding” and the application must be forcibly terminated. Resolution To work around this problem in the Quartus® Prime Standard Edition Software version 24.1, download and install the patch below: This problem is scheduled to be fixed in a future release of the Quartus® Prime Standard Edition Software. Custom Fields values: ['novalue'] Troubleshooting 15019033457 novalue ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Standard'] 26.1 24.1 ['Arria® 10 FPGAs and SoCs', 'Arria® V FPGAs and SoCs', 'Arria® II FPGAs', 'Cyclone® 10 LP FPGA', 'Cyclone® V FPGAs and SoCs', 'Cyclone® IV FPGAs', 'MAX® 10 FPGAs', 'Stratix® IV FPGAs', 'Stratix® V FPGAs', 'MAX® II CPLDs', 'MAX® V CPLDs'] ['novalue'] ['novalue'] ['novalue']