Auto gated clock convert to clock enable - Auto gated clock convert to clock enable I get a ASIC design which want to be verified on FPGA. I know Quartus support "Auto gated clock convert to clock enable" recently. Web: https://www.intel.com/content/www/us/en/programmable/quartushelp/15.1/index.htm#verify/da/comp_file_rules_clock.htm?elq_cid=7936472_ts1634786187118&erpm_id=10817332_ts1634786187118 From the above web, I know that case(1) can completely support gated clock conversion. How about case(2)? Can latch-based clock gating work for gated clock conversion? Should I do formal verification when "Auto gated clock convert to clock enable" is turned on. How about case(3)? Case(1): Note that enable_a is from the clock_a domain. assign gated_clock_a=clock_a & enable_a; assign gated_clock_a=clock_a | enable_a; Case(2): Latch-based clock gating always@( *) begin if (~clock_a ) enable_a <= enable; end assign gated_clock_a= clock_a & enable_a ; Case(3): Note that enable_a is from the clock_a domain. Note that enable_a2 is from the gated_clock_a domain. assign gated_clock_a = clock_a & enable_a; assign gated_clock_a2 = gated_clock_a | enable_a2; Thank you very much. Replies: Re: Auto gated clock convert to clock enable Hi NurinaW OK. Thank you, NurinaW, very much. Replies: Re: Auto gated clock convert to clock enable Hi, I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you. Regards, Nurina P/S: If you like my comment, feel free to give Kudos. If my comment solved your problem, feel free to accept my comment as solution! Replies: Re: Auto gated clock convert to clock enable Hi, It depends on your device. It's supported in Arria® series, Cyclone® II, Cyclone III, Cyclone IV, Stratix® II, Stratix II GX, Stratix III, Stratix IV, and Stratix V devices. You can refer to section 2.2.3.5 here: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/archives/ug-qpp-design-recommendations-19-1.pdf#page=65 And this help page; https://www.intel.com/content/www/us/en/programmable/quartushelp/current/index.htm#logicops/logicops/def_synth_gated_clock_conversion.htm Regards, Nurina Replies: Re: Auto gated clock convert to clock enable Hi NurinaW, Thank you, NurinaW, very much. I understand it. About case 3, a cascaded clock gating, ASIC has different application domain so that there needs a cascaded clock gating to gate the clock for different IP and for different application domain. So, I can't cancel that. Replies: Re: Auto gated clock convert to clock enable Hi, Sorry for the late response. From what I know, case 2 is allowed. You can refer to pages 12-10 to 12-12 of this document: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/hb/qts/qts_qii51006.pdf#page=10 Is case 3 a cascaded clock gating? This only works on certain devices, I think it's best you don't use this method since you're doing ASIC prototyping. Regards, Nurina Replies: Re: Auto gated clock convert to clock enable Could someone please tell me the answer? Thank you very much.