Why does Nios® V/c processor fail to service interrupts when it is under CLINT-Vectored mode? - Why does Nios® V/c processor fail to service interrupts when it is under CLINT-Vectored mode? Description Due to a problem in the Quartus ® Prime Pro Edition Software version 25.3.1, the Nios ® V/c processor might fail to service any interrupts when it is under CLINT-Vectored mode. The affected interrupts are platform interrupts, software interrupt, and timer interrupt. The following are not affected by this issue: Nios ® V/c processor under CLINT-Direct, Nios ® V/m processor, and Nios ® V/g processor This is because the Board Support Package Editor fails to generate relevant macros in system.h to support CLINT-Vectored mode. Resolution To continue using CLINT-Vectored with Nios ® V/c processor, add the following macros in the system.h. #define ALT_CPU_INT_MODE 1 #define NIOSVSMALLCORE_INT_MODE 1 #define INTEL_NIOSV_C_0_DM_AGENT_INT_MODE 1 This problem is scheduled to be fixed in a future release of the Quartus ® Prime Pro Edition Software version 26.1. Custom Fields values: ['novalue'] Troubleshooting 15018567677 novalue ['Soft Embedded Processors RISC-V NIOS V (Primary)'] ['FPGA Dev Tools Quartus® Prime Software Pro'] novalue 25.3.1 ['Agilex™ 3 FPGAs and SoCs', 'Agilex™ 5 FPGAs and SoCs', 'Agilex™ 7 FPGAs and SoCs', 'Agilex™ 9 FPGA Direct RF-Series', 'Agilex™ 9 FPGAs and SoCs', 'Arria® 10 FPGAs and SoCs', 'Cyclone® 10 GX FPGA', 'Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']