Internal Error: ECC error while booting the SoC from a NAND flash in Intel® Arria®10 SoC - Internal Error: ECC error while booting the SoC from a NAND flash in Intel® Arria®10 SoC Description This error appears while using the quartus_hps to program the flash. In case the flash device has bad sectors, the quartus_hps wouldn't be able to deal with these bad sectors. The quartus_hps will copy files but some of them might get corrupted. This gives the following error: jiffs2: mtd->read,0x.. Bytes from 0x…… returned ECC error Resolution To overcome this error, use the DS-5 debugger and U-Boot to program the flash on an Intel® Arria® 10 FPGA board. Click here to get the correct procedure to program flash device via alternative ways. Custom Fields values: ['novalue'] Troubleshooting 1607102617 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 19.1 16.1 ['Arria® 10 SX FPGA'] ['Embedded Dev Tools SoC Suite'] ['novalue'] ['novalue']