RapidIO II MegaCore Function User Guide Does Not Document That Scrambling is Turned On By Default - RapidIO II MegaCore Function User Guide Does Not Document That Scrambling is Turned On By Default Description By default, scrambling/descrambling is turned on in the RapidIO II IP core. That is, the default value of the Scrambling/descrambling enabled bit of the LP-Serial Lane n Status 4 register at offset 0x220 (and offsets 0x240, 0x260, and 0x280, depending on the number of lanes in your RapidIO II IP core variation) is 1’b1. However, the RapidIO II MegaCore Function v12.1 SP1 User Guide erroneously indicates in Table 6-21 that the default value is 1’b0. Resolution Be aware that by default, scrambling/descrambling is turned on in the RapidIO II IP core. This issue is fixed in version 14.0 of the RapidIO II MegaCore Function User Guide . Custom Fields values: ['novalue'] Troubleshooting novalue True ['novalue'] ['FPGA Dev Tools Quartus II Software'] 14.0 12.1 ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']