Simulation Grid Size - Simulation Grid Size Hi, I am currently using Quartus Prime Version 20.1 Lite Edition on a Surface Pro 7. The issue is that the simulation grid size will not adjust to anything lower than 20 ns. I can go to Edit -> Grid Size and set it to anything greater than or equal to 20 ns, but if I set it to anything less than 20 ns, for example 5 ns, then the parameter changes but the grid size, on the simulation window, defaults to 20 ns. Please help. Replies: Re: Simulation Grid Size Hi, Glad to hear that your issue has been addressed. I'll now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Thank you. Replies: Re: Simulation Grid Size So maybe the display doesn't show smaller grid size until you zoom in or make the window bigger. I use ModelSim or QuestaSim. It's been a long time since I used .vwf. Replies: Re: Simulation Grid Size All I did was maximize the simulation window. Replies: Re: Simulation Grid Size What's different between the 2 waveforms you've posted? The grid is 20 in the first one and 10 in the second, so you did something to get the grid smaller than 20. Replies: Re: Simulation Grid Size Yes I can, but is there anything I can do to get the grid size of 5 ns to show up on the simulation window? The lab I am working on requires me to submit screenshots of the simulation window showing that I selected the correct grid size for an End Time of 1 us. Replies: Re: Simulation Grid Size Can't you just zoom in with the magnifying glass?