Failed to load client library Message When Using USB Blaster with ARM DS-5 - Failed to load client library Message When Using USB Blaster with ARM DS-5 Description If you try to debug the SoC HPS with the ARM DS-5 Development Studio over a USB Blaster, you might see a “Failed to load client library” message. The Altera JTAG client library, required for debugging with DS-5 over the USB Blaster, links against a library which might not be found automatically. Although the Altera Complete Design Suite includes the required library, its containing directory is not included on the library path by DS-5 when the debugger starts. Resolution You can work around this issue by adding /linux to LD_LIBRARY_PATH before launching DS-5, with the following command: sudo yum install libgomp.i686 Alternatively, upgrade to the SoC EDS v.14.1. Custom Fields values: ['novalue'] Troubleshooting novalue True ['novalue'] ['FPGA Dev Tools Quartus II Software'] 14.1 13.0 ['Arria® V FPGAs and SoCs', 'Cyclone® V FPGAs and SoCs'] ['Embedded Dev Tools SoC Suite'] ['novalue'] ['novalue']