"User Mode" (m1_mode_hwtcl) "MCDMA" is out of range: "Bursting Master", "Bursting Slave", "BAM+BAS" - "User Mode" (m1_mode_hwtcl) "MCDMA" is out of range: "Bursting Master", "Bursting Slave", "BAM+BAS" Description Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 22.3, the Multi Channel DMA Intel® FPGA IP for PCI Express might report the following error if configuring the IP with Port Mode: "Root Port": "User Mode" (m1_mode_hwtcl) "MCDMA" is out of range: "Bursting Master", "Bursting Slave", "BAM+BAS" Resolution To work around this problem, follow these steps using the IP parameter editor: Set the Hard IP and Port modes to Gen4 2x8 , Native Endpoint (Top-Level Settings>Hard IP Mode/Port Mode). Set the PCIe1 MCDMA User Mode to Bursting Master (PCIe1 Settings>PCIe1 MCDMA Settings>User Mode). Set Hard IP mode back to the Root Port mode you require (ie Gen4 x16 / Gen4 x8 Root Port) (Top-Level Settings>Hard IP Mode/Port Mode) If you are using the Platform Designer to instantiate the IP, these additional steps might be required for a successful compilation: Close the Platform Designer. Re-open the Platform Designer (.qsys) and click on the MCDMA IP Component. Click the Upgrade button under the Parameters window of the IP. This problem is fixed in Intel® Quartus® Prime Pro Edition Software 22.4. Custom Fields values: ['novalue'] Troubleshooting 14017609518 False ['Interfaces'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 22.4 22.3 ['Agilex™ 7 FPGAs and SoCs', 'Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']