Why does Board Support Package Editor fail to generate embedded peripheral IP drivers when generating BSP FreeRTOS project for Nios® V processor? - Why does Board Support Package Editor fail to generate embedded peripheral IP drivers when generating BSP FreeRTOS project for Nios® V processor? Description Due to a problem in the Quartus ® Prime Standard Edition Software version 24.1 and 25.1, the BSP Editor fails to generate embedded peripheral IP drivers, when it is generating BSP FreeRTOS project for Nios ® V processor. This is because the BSP Editor is not enabled to generate those drivers in FreeRTOS. Refer to Embedded Peripherals IP User Guide - Driver Support for the list of embedded peripherals with driver support. Resolution Patches are available to fix this problem for the Quartus ® Prime Standard Edition Software version 24.1 and 25.1 Linux and Windows versions. Download and install patch below. Quartus® Prime Standard Edition Software v24.1 Patch 0.01 Quartus® Prime Standard Edition Software v25.1 Patch 0.01 This problem is currently scheduled to be resolved in a future release of the Quartus ® Prime Standard Edition Software. Custom Fields values: Troubleshooting QS-17835, QS-453346 novalue ['Soft Embedded Processors RISC-V NIOS V (Primary)'] ['FPGA Dev Tools Quartus® Prime Software Standard'] novalue 24.1 ['Arria® 10 FPGAs and SoCs', 'Arria® II FPGAs', 'Arria® V FPGAs and SoCs', 'Cyclone® 10 LP FPGA', 'Cyclone® IV FPGAs', 'Cyclone® V FPGAs and SoCs', 'MAX® 10 FPGAs', 'Stratix® V FPGAs', 'Stratix® IV FPGAs', 'MAX® II CPLDs', 'MAX® V CPLDs']