Why doesn't Nios II Eclipse Debugger execute when Data Triggers are set to 0 with Hardware Breakpoints enabled - Why doesn't Nios II Eclipse Debugger execute when Data Triggers are set to 0 with Hardware Breakpoints enabled Description Due to a problem in the Quartus® II software version 15.1 and earlier, Nios® II Eclipse Debugger may give an error when Data Trigger is set to 0 with Hardware Breakpoints enabled in the Jtag Debug Tab in Nios II Gen 2 Processor. This error is seen with other memories except on-chip memory is used in the design. Error: Target request failed: Warning: Cannot insert breakpoint. Cannot access memory at address 0x7c. Resolution To work around this problem in the Quartus II software version 15.1 and earlier, follow the steps below: 1) Double click on Nios II Gen 2 Processor. 2) When the Parameter box appear, go to the Jtag Debug tab. 3) Set a value for Data Triggers. Hardware Breakpoints should already been enabled. 4) Generate Qsys and recompile Quartus. This problem is scheduled to be fixed in a future version of the Quartus II software. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 14.0 ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']