FLashing EPC1 device using quartus programmer - FLashing EPC1 device using quartus programmer Hi, Is its possible to flash an EPC1 device with .pof file using quartus programmer? Regards Replies: Re: FLashing EPC1 device using quartus programmer HI intfpga2, What FvM has stated is indeed true. From the EPC1 Datasheet: "Programming support with Altera’s Master Programming Unit (MPU) and programming hardware from Data I/O, BP Microsystems, and other manufacturers" Else, easier with JTAG programmable EPC2. Regards, Fakhrul Replies: Re: FLashing EPC1 device using quartus programmer As said Altera MPU or third party. I guess you don't have access to MPU, so third party is your option. Several Elnec devices are supporting EPC1 according to web site. Replies: Re: FLashing EPC1 device using quartus programmer Hi, you mean Max-plus 11 tool, or the third party tools like Elnec? Replies: Re: FLashing EPC1 device using quartus programmer Hi, you need old "Altera Master Programming Unit (MPU)" or more likely a third party parallel programmer supporting EPC1. Simpler to switch to JTAG programmable EPC2 etc.