Error(12418): Termination logic option is set to Series 50 Ohm without Calibration for output pin <pin name>~pad, but setting is not supported by I/O standard 3.0-V LVCMOS - Error(12418): Termination logic option is set to Series 50 Ohm without Calibration for output pin <pin name>~pad, but setting is not supported by I/O standard 3.0-V LVCMOS Description Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 22.1, this error may occur when 3VIO and HPS IP are used simultaneously for designs targeting Intel® Stratix10® devices because "OUTPUT_TERMINATION OFF" assignment is missed to be enabled. Resolution To work around this problem in the Intel® Quartus® Prime Pro Edition Software version 22.1, add the . qsf assignment "set_instance_assinment -name OUTPUT_TERMINATION OFF -to <pin>" for failed pins. This problem has been fixed in the Intel® Quartus® Prime Pro Edition Software version 22.2. Custom Fields values: ['novalue'] Troubleshooting 15010836332 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 22.2 22.1 ['Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']