Why does the “RX Word Aligner Pattern (Hex)” Value Appear Incorrectly for the GbE or GbE 1588 Transceiver Configuration Rules of the Stratix® 10 L- and H-Tile Device Transceiver PHY? - Why does the “RX Word Aligner Pattern (Hex)” Value Appear Incorrectly for the GbE or GbE 1588 Transceiver Configuration Rules of the Stratix® 10 L- and H-Tile Device Transceiver PHY? Description Due to a problem in the Quartus® Prime Software, the “RX Word Aligner Pattern (Hex)” value contained in the “Standard PCS” tab of the GUI does not reflect the complete ordered set required for the RX Word Aligner to achieve synchronization when in GbE or GbE 1588 mode. Resolution In order to ensure that the RX Word Aligner in GbE or GbE 1588 mode behaves correctly, enter the full ordered set according to the IEEE 802.3, Clause 36,40 specification. For example K28.5, D16.2. Custom Fields values: ['novalue'] Troubleshooting 1408784204 False ['L-Tile H-Tile Transceiver Native PHY Stratix® 10 FPGA IP'] ['FPGA Dev Tools Quartus® Prime Software Pro'] No plan to fix 18.0 ['Stratix® 10 GX FPGA', 'Stratix® 10 MX FPGA', 'Stratix® 10 SX FPGA', 'Stratix® 10 TX FPGA'] ['novalue'] ['novalue'] ['novalue']