Why is the rx_ready signal stuck at ‘0’ when the Adaptation mode is set to Manual configuration in the GTS PMA/FEC Direct PHY FPGA IP? - Why is the rx_ready signal stuck at ‘0’ when the Adaptation mode is set to Manual configuration in the GTS PMA/FEC Direct PHY FPGA IP? Description Due to a problem in the Quartus® Prime Pro Edition Software version 24.1, you might see that the rx_ready signal is stuck at ‘0’ when the Adaptation mode is set to Manual configuration in the GTS PMA/FEC Direct PHY FPGA IP under the RX Datapath Options tab. As a result, you will not be able to proceed with the testing in manual adaptation mode. Resolution This problem is fixed beginning with the Quartus® Prime Pro Edition software version 24.3. Custom Fields values: ['novalue'] Errata 15015728232 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 24.3 24.1 ['Agilex™ 5 FPGA E-Series'] ['novalue'] ['novalue'] ['novalue']