How do I connect the detected_rate and detected_rate_in signals from the Serial Digital Interface (SDI) MegaCore? - How do I connect the detected_rate and detected_rate_in signals from the Serial Digital Interface (SDI) MegaCore? Description The detected_rate signal is available when you generate the SDI MegaCore® in Transceiver Only configuration. The detected_rate_in signal is available when you generate the SDI MegaCore as protocol only block configuration. Resolution These signals are used to detect whether the video format is 1/1.000 or 1/1.001. Connect the detected_rate signal to the detected_rate_in signal. These signals are used in conjunction with the rx_video_format signal to differentiate the video format. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 13.1 ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']