JRunner Software - The JRunner™ software driver is developed to configure SRAM-based programmable logic devices (PLDs) in JTAG mode for embedded configurations. You can customize the modular souce code's I/O control routines (provided as separate files) for your system. The JRunner driver supports the raw binary file (.rbf) format generated by the Quartus development software. The input file to the JRunner driver is in chain description file (.cdf) format. The JRunner software was developed and tested on the Windows NT, 2000, and XP platform. Note that JRunner cannot configure MAX 10 FPGA and Stratix 10 devices, you may refer to Jam STAPL Software if you wish to implement embedded configuration to these devices in JTAG mode. legacy Download {"title":"JRunner Software"} SupportYou can search for known issues and technical support solutions by visiting Knowledge Database (https://www.intel.com/content/www/us/en/support/programmable/kdb-filter.html).You can also visit the IntelCommunity Forum (https://community.intel.com) to connect to and discuss technical issues with other FPGA users.For other resources visit FPGA Support Resources (https://www.intel.com/content/www/us/en/programmable/support/support-resources.html) page.. Legal NoticeCOMMERCIAL USE SOFTWARE LICENSE AGREEMENT FOR PROGRAMMABLE SOLUTIONS GROUP governs the installation and use of this software.. The JRunner™ software driver is developed to configure SRAM-based programmable logic devices (PLDs) in JTAG mode for embedded configurations. You can customize the modular souce code's I/O control… Download Center Windows Windows JRunner Software Utilities 2.6 Jrunner Software EAR99