Does the Reconfiguration Controller's MIF Streamer support byte and word addressing modes in Stratix V GX devices? - Does the Reconfiguration Controller's MIF Streamer support byte and word addressing modes in Stratix V GX devices? Description Yes the Reconfiguration Controller's MIF Streamer supports byte and word addressing modes in Stratix V GX devices. Byte addressing is the default mode. To change the addressing mode in the MIF Streamer, modify bit [1] of Streamer Module Internal MIF Register Offset 0x1 as detailed below. Table 1. Streamer Module Internal MIF Register Offsets Offset Bits R/W Register Name Description 0x1 [1] RW MIF addressing mode Specifies the MIF addressing mode 1 = word addressing 0 = byte addressing The Quartus 12.0 and earlier versions of the Transceiver PHY IP User Guide does not document how to change addressing modes and will be updated in a future release. For more information on the reconfiguration controller refer to the Transceiver PHY IP User Guide . Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 12.0 ['Stratix® V FPGAs'] ['novalue'] ['novalue'] ['novalue']