Altera® Quartus® Software – JTAG Debugging Tools - 24 Minutes This training is part 5 of a 6 part series. In this training, you will get an introduction to some of the JTAG debugging tools in the Altera® Quartus® software. The debugging tools that are included in this training are Signal Tap, In System Sources and Probes, and In System Memory Content Editor. Course Objectives Upon course completion you will have a basic understanding of: • Signal Tap • In System Sources and Probes • In System Memory Content Editor Skills Required • Basic digital logic knowledge If the audio for the course does not start automatically, press pause and then play on the course player. The transcript of the course audio is available in the Notes or closed captioning (CC) feature of the player. If you need assistance with this course, please email fpgatraining@altera.com. Reference Course Code: FPGA_OQCPT5. FPGA_OQCPT5. <p>Altera Quartus Software