Generating IP core with TCL commands outside Platform Designer - Generating IP core with TCL commands outside Platform Designer Is it possible on Quartus to generate an IP core with TCL commands (no GUI)? With Vivado it’s very simple to echo TCL commands that generates the IP with parameter set, and then I can reuse them for generating the IP through a script, but with Quartus I’m really struggling to figure out how to do it. I just want to use IPs from the IP catalog (no custom IP) and generate the .qip and .vhd output files. I think, the solution should be outside the Platform Designer environment, since I want to instantiate single IPs and not a system. Replies: Re: Generating IP core with TCL commands outside Platform Designer Hi, For Quartus Pro, use quartus_ipgenerate or ip-deploy check these links https://www.intel.com/content/www/us/en/docs/programmable/683609/24-2/generate-an-ip-component-or-system-with.html and https://www.intel.com/content/www/us/en/docs/programmable/683609/24-2/generate-an-ip-variation-file-with-ip-deploy.html For Quartus Standard/Lite, use IP-Generate check links below: https://www.intel.com/content/www/us/en/docs/programmable/683742/17-0/using-ip-generate-command.html https://www.intel.com/content/www/us/en/support/programmable/articles/000077533.html Thanks, Regards, Sheng