SOPC Builder Generated IP Compiler for PCI Express Variations Have Wrong Default Value for test_in[5] - SOPC Builder Generated IP Compiler for PCI Express Variations Have Wrong Default Value for test_in[5] Description The simulation testbench for SOPC Builder generated variations of the IP Compiler for PCI Express has the test_in[5] bit set to 0 by default. However, the correct default value is 1. The default value of 0 allows the IP Compiler for PCI Express to enter compliance test mode. Resolution To avoid any issues that arise from the test_in[5] bit allowing the IP Compiler for PCI Express to enter compliance test mode, tie the signal high. If you are using the testbench simulation file pci_express_compiler_examples\sopc\testbench\pci_express_compiler_testbench.v for your own design, modify the file to set test_in[5] explicitly to the value of 1. This issue will be documented in a future version of the IP Compiler for PCI Express User Guide . Custom Fields values: ['novalue'] Troubleshooting novalue True ['novalue'] ['FPGA Dev Tools Quartus II Software'] novalue 11.0 ['Programmable Logic Devices'] ['novalue'] ['novalue'] ['novalue']