How can the Arria V device on the Arria V SoC development kit be configured with the user hardware 1 image from the CFI flash memory? - How can the Arria V device on the Arria V SoC development kit be configured with the user hardware 1 image from the CFI flash memory? Description On the Arria® V SoC development kit, the default boot sequence involves the Hard Processor System (HPS) programming the FPGA and then booting Linux. Y ou will see the LCD display "Hello Tim" once boot up completes after powering up the development kit. To configure the Arria V device with the user hardware 1 image from the CFI flash, you need to disable the default boot sequence. Resolution To disable the default boot sequence, remove the SD-Card or change the BSEL jumpers before powering up the development kit. After powering up the development kit , use the PGM_SEL (S13) push button to select the user hardware 1 image. Then press PGM_CONF (S12) push button to load the user hardware 1 image. Custom Fields values: ['novalue'] Troubleshooting novalue False ['novalue'] ['novalue'] novalue novalue ['Arria® V FPGAs and SoCs', 'Arria® V ST FPGA'] ['novalue'] ['novalue'] ['novalue']