Program MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit - Program MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit It seems the mini usb cannot be used to program the device. The PL-USB-BLASTER-RCN is around $300 from digikey and mouser. This seems like a ridiculous price just to program the eval board. Is there any cheaper alternatives? Replies: Re: Program MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit I’m glad that your question has been addressed, I now transition this thread to community support. If you have a new question, feel free to open a new thread to get the support from Intel experts. Otherwise, the community users will continue to help you on this thread. Thank you. Replies: Re: Program MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit Hello, There is : https://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&CategoryNo=74&No=46&PartNo=1#contents Terasic is Intel Design Partner. regards, Farabi Replies: Re: Program MAX 10 FPGA (10M08S, 144-EQFP) Evaluation Kit I presume you're talking about this kit: https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/max/10m08-evaluation-kit.html This is an older kit that does not include an onboard USB Blaster, so yes you would need a separate USB Blaster (USB to 10-pin JTAG header) to program the device. There are other MAX 10 kits that include USB Blaster on board, like this one: https://www.intel.com/content/www/us/en/products/details/fpga/development-kits/max/10m50-evaluation-kit.html