Error(21843): engineered_link_mode == DISABLE (or) ENABLE - Error(21843): engineered_link_mode == DISABLE (or) ENABLE Description Due to a problem in the Quartus® Prime Pro Edition Software version 24.3 and earlier, Agilex™ 7 F-Tile transceiver designs may fail during the compilation process when a TX Simplex F-Tile transceiver IP and RX Simplex F-Tile transceiver IP are merged within the same quad and channel but have different " engineered_link_mode " settings. For example, for a TX F-Tile PMA/FEC Direct PHY FPGA IP and RX F-Tile JESD204B FPGA IP merged in the same physical location, similar error messages will appear during the Logic Generation stage: Error(21842): Support logic cannot be generated because IP components used in the design have conflicting settings Error(21843): Conflict 0 ---------------------------------------------------------------- Error(21843): Input variables: Error(21843): user.bb_f_ux_tx[3] -> u_jesd_f_ed_qsys_RX|jesd_f_ss_rx|directphy_f_0|directphy_f_0|dphy_hip_inst|persystem[0].perxcvr[3].fgt.tx_ux.x_bb_f_ux_tx Error(21843): engineered_link_mode == DISABLE Error(21843): is_used == TRUE Error(21843): location == UX4 Error(21843): user.bb_f_ux_rx[3] -> u_jesd_f_ed_qsys_RX|jesd_f_ss_rx|intel_jesd_rx|intel_jesd_rx|inst_j204b_f_hip|hip_bb|bb_f_ux_rx_inst3 Error(21843): engineered_link_mode == ENABLE Error(21843): is_used == TRUE Error(21843): location == UX4 Error: Design cannot be programmed onto available F-Tiles because given location constraints are conflicting, or because the design requires more resources compared to what is available on current device Error: Quartus Prime Logic Generation Tool was unsuccessful. In this example, you may encounter this problem with transceiver F-Tile IPs other than the F-Tile PMA/FEC Direct PHY FPGA IP and F-Tile JESD204B IP. Resolution To work around this problem, modify the Quartus® generated file so the engineered_link_mode parameter matches between the two F-Tile transceiver IPs merged in the same physical location. This problem will be fixed in a future version of the Quartus® Prime Pro Edition Software. Custom Fields values: ['novalue'] Troubleshooting 14023590309 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 24.4 24.3 ['Agilex™ 7 FPGA I-Series'] ['novalue'] ['novalue'] ['novalue']