Is DDR5 phy-only IP available? - Is DDR5 phy-only IP available? Hi! I'm using Agilex 7 M-series (AGMF039) and Quartus Prime Pro 24.2. I'm looking for DDR5 PHY-only IP, but I couldn't find it in the EMIF IP. However, I confirmed that PHY-only mode is provided for DDR4 in Agilex 7 I/F-series. So, I have two questions: 1. Is there a plan to release DDR5 PHY-only IP? If so, could you provide a rough release date? 2. If I modify the EMIF_DDR5 IP to use it in PHY-Only mode (e.g., emif_ph2_620), can it be synthesized and ported to the FPGA? Thank you. Replies: Re: Is DDR5 phy-only IP available? Hi nama828, " 1. Is there a plan to release DDR5 PHY-only IP? If so, could you provide a rough release date? " Yes, there is plan to support PHY-only mode in EMIF IP for Agilex 7 M series device but the release date is not yet confirmed. " 2. If I modify the EMIF_DDR5 IP to use it in PHY-Only mode (e.g., emif_ph2_620), can it be synthesized and ported to the FPGA? " No, because the EMIF IP is using harden circuitry. Regards, Adzim