Why does my Intel Agilex® SoC or Intel® Stratix®10 SoC HPS device fail to re-configure from an HPS RSU combined application image, when issuing a reboot command from linux-socfpga? - Why does my Intel Agilex® SoC or Intel® Stratix®10 SoC HPS device fail to re-configure from an HPS RSU combined application image, when issuing a reboot command from linux-socfpga? Description Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 21.1 and later, Intel® Stratix® 10 SoC or Intel Agilex® SoC devices configuring from Intel Stratix 10 or Intel Agilex SoC Hard Processor System (HPS) Remote System Update (RSU) combined application images may encounter a boot failure after a reboot command is issued from linux-socfpga. Resolution Patch 0.37fw for the Intel Quartus Prime Pro Edition Software version 21.4 is available to fix this problem. Download the relevant patch from the following links: Patch 0.37fw for the Intel Quartus Prime Pro Software version 21.4 for Windows ( quartus-21.4-0.37fw-windows.exe ) Patch 0.37fw for the Intel Quartus Prime Pro Software version 21.4 for Linux ( quartus-21.4-0.37fw-linux.run ) Readme for patch 0.37fw for the Intel Quartus Prime Pro Software version 21.4 ( quartus-21.4-0.37fw-readme.txt ) Re-generate RSU application / combined application images using the Intel Quartus Programming File Generator tool (quartus_pfg) Note: A re-compile of your Intel Quartus Prime Pro Design is not required. This problem is scheduled to be resolved in a future release of the Intel Quartus Prime Pro Edition Software. Custom Fields values: ['novalue'] Troubleshooting 18019294743 True ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 22.1 21.1 ['Agilex™ 7 FPGAs and SoCs', 'Stratix® 10 FPGAs and SoCs'] ['novalue'] ['novalue'] ['novalue']