Why isn't the Ethernet Subsystem FPGA IP displayed in the IP Catalog when you use the Agilex™ 7 FPGA M-Series devices? - Why isn't the Ethernet Subsystem FPGA IP displayed in the IP Catalog when you use the Agilex™ 7 FPGA M-Series devices? Description Due to a problem in the Quartus® Prime Pro Edition Software version 24.2, you may not see the Ethernet Subsystem FPGA IP in the IP Catalog when you use the Agilex™ 7 FPGA M-Series devices. When using the Agilex™ 7 FPGA M-Series or I-Series devices, the Ethernet Subsystem FPGA IP can be seen in the IP Catalog. Resolution To work around this problem in the Quartus® Prime Pro Edition software version 24.2, you can generate the Ethernet Subsystem FPGA IP using the command-line method below instead of the IP Catalog GUI. qsys-edit --new-component-type=<IP Name> --family=<Family Name> --part=<Device> <IP File name> For instance, qsys-edit --new-component-type=hssi_ss --family="Agilex 7" --part=AGIB027R31B1E2V eth_subsystem.ip This problem is fixed beginning with the Quartus® Prime Pro Edition software version 24.3.1. Custom Fields values: ['novalue'] Troubleshooting 15016796491 False ['novalue'] ['FPGA Dev Tools Quartus® Prime Software Pro'] 24.3.1 24.2 ['Agilex™ 7 FPGA M-Series'] ['novalue'] ['novalue'] ['novalue']